Tank accessories


	Boating courses Dive Courses Specialties land and Sea Mares TUSA Tanks Tank accessories Gloves Masks Boots Swim Gear Mask tamers Snorkels Finsets Fins Snorkel Packages Bags Dive Accessories Cameras Knives Torches U/W Scooters Aircards Boatcards Handspears Alloy guns Wood guns Metal guns Spear rubber Spear acc shafts Specials Dry cases Home freight Watches Pnuematic guns

Current Category
Tank accessories

Scuba tank valves

There are three types of pillar valve:

A-clamp or yoke - the connection on the regulator surrounds the valve pillar and presses the output O-ring of the pillar valve against the input seat of the regulator. This type is simple, cheap and very widely used worldwide. It has a maximum pressure rating of 232 bar and the weakest part of the seal, the o-ring, is not well protected from over-pressurisation.

232 bar DIN (5-thread, G5/8) - the regulator screws into the pillar valve trapping the O-ring securely. These are more reliable than A-clamps because the o-ring is well protected.

A yoke to DIN adaptor 300 bar DIN : (7-thread, G5/8) - these are similar to 5-thread DIN fitting but are rated to 300 bar working pressures.

Note that reference to M25 threads refers to the tank neck thread not the valve size.


	Double tank holder Stop your cylinder sliding around during transport. QTY:


	Isolation manifold 300 bar 300 bar QTY:

Previous Page 1 [2]

Professional Online scuba diving store retailing Scuba diving and spearfishing equipment with Australia wide sales. We stock scuba diving equipment and dive accessories from Mares,Tusa and Aquanaut. Located on the NSW Central Coast, Pro-Dive offer you value for money, escorted local and international scuba diving holidays. For more information please call our store on 61+2 4389 3483 or BY EMAIL

Thank you for shopping with Pro-Dive Central Coast P/L